Confined spaces incidents aren't the most common, but they can be the most deadly. That's because the hazards tend to be misunderstood or underestimated. And many confined spaces fatalities involve not one, but two, victims: the worker and the rescuer.
OSHA's Permit-Required Confined Spaces Regulation was created to help prevent these incidents. And the National Safety Council's Confined Spaces Compliance Training Seminar can help you put the regulation into practice and save lives.
Through discussion and activities, our professional facilitator will break down the regulation into terms you can understand. In just four hours, you'll learn practices and procedures that will keep you in compliance and, best of all, protect your employees.
The course covers:
Key elements of the OSHA Permit-Required Confined Spaces Regulation (29 CFR 1910.146)
Confined spaces concepts and terminology
The difference between confined spaces and permit-required confined spaces
How to identify and evaluate hazards: atmospheric, mechanical, chemical
Procedures for controlling hazards
Proper protective equipment for confined spaces
Duties of the entry supervisor, entrant, and attendant
Procedures for self-rescue, non-entry rescue, entry rescue by company employees, and entry rescue by emergency responders
Completing the entry process
4-hour course
Time:
1:00pm - 5:00pm
Description:
Lockout/Tagout
Location: Columbia SC
Fee: Member $99.00 Non-member $135.00
Are you in compliance?
Lockout/Tagout is one of OSHA's Top 10 "Most Serious Violations" and Top 10 "Most Often Cited Violations." Our facilitators are safety experts who will break down the regulation and answer your site-specific questions. National Safety Council safety experts will guide you through interactive discussions and pair activities relating to the OSHA lockout/tagout regulation. Network with your peers and apply what you learn from this course at your worksite.
Understand key elements of the Lockout/Tagout regulation (29CFR 1910.147, Subpart J) issued by the Occupational Safety and Health Administration (OSHA).
Who should attend?
This course is intended for those team leaders, middle managers, human resource personnel, safety and health committee members, and other employees who have recently been appointed to safety and health responsibilities or who are seeking the knowledge about the lockout/tagout OSHA regulation.
What you'll learn:
Establish the purpose for lockout/tagout.
Identify the key components of an energy control program.
Identify the six main elements that should be contained in lockout/tagout procedures.
Identify key elements of a periodic inspection of the energy control device to restore energy and equipment.
Explain group lockout/tagout.
Identify steps to follow to perform testing or positioning on a piece of equipment being repaired.
Recognize the importance of "best practices" for the most effective lockout/tagout program implementation and operation.
You'll be able to:
Start and implement a lockout/tagout program at your facility.
Set priorities for action once you get back at your facility.
Utilize the resource guide that includes: the OSHA standard, checklist and contact lists.
4-hour course
Time:
8:30am - 4:00pm
Description:
Safety Management Techniques
Location: Myrtle Beach SC
Fee: Member $1,195 Non-member, $1,550
Advanced Safety Certificate
Safety Management Techniques
Let us help you and your company achieve excellence in your safety and health efforts. Attend this essential and practical course in safety management techniques.
WHICH CERTIFICATE?
Step 3: Advanced Safety Certificate
TRAINING GOAL
Upon completion of the Safety Management Techniques course, you'll be able to use new knowledge and skills to influence the safety and health efforts at your facility/company.
WHO SHOULD ATTEND?
Attend the Safety Management Techniques course if you are coordinating, supervising, or managing safety and health efforts at your facility/company. Designed for the safety leader, this course meets the needs of safety and health committee leaders, supervisors, and middle/upper managers.
WHY SHOULD YOU ATTEND?
Based on sound safety, management, quality, and performance technology principles, Safety Management Techniques is a 4.5 day (30 hours) course that will help you manage employees and/or projects in your safety and health efforts. Program content, case studies, exercises, and discussions focus on the practical knowledge and skills required to effectively deal with safety-related organizational practices, environmental conditions, and human relations issues.
You'll examine your function and leadership role as a safety and health practitioner as special knowledge and skills are covered in this course, including:
Interviewing and consulting
Addressing individual and organizational dynamics
Conducting safety audits
Influencing and managing change
Working with a safety and health committee
Budgeting for safety and health efforts
As a special review activity, you'll assess your own organization's safety and health practices and create a management plan that you can take back to your facility for implementation.
We recommend that you successfully complete Principles of Occupational Health prior to enrolling in this program.
4-Day Course
Time:
8:30am - 4:00pm
Description:
Safety Management Techniques
Location: Myrtle Beach SC
Fee: Member $1,195 Non-member, $1,550
Advanced Safety Certificate
Safety Management Techniques
Let us help you and your company achieve excellence in your safety and health efforts. Attend this essential and practical course in safety management techniques.
WHICH CERTIFICATE?
Step 3: Advanced Safety Certificate
TRAINING GOAL
Upon completion of the Safety Management Techniques course, you'll be able to use new knowledge and skills to influence the safety and health efforts at your facility/company.
WHO SHOULD ATTEND?
Attend the Safety Management Techniques course if you are coordinating, supervising, or managing safety and health efforts at your facility/company. Designed for the safety leader, this course meets the needs of safety and health committee leaders, supervisors, and middle/upper managers.
WHY SHOULD YOU ATTEND?
Based on sound safety, management, quality, and performance technology principles, Safety Management Techniques is a 4.5 day (30 hours) course that will help you manage employees and/or projects in your safety and health efforts. Program content, case studies, exercises, and discussions focus on the practical knowledge and skills required to effectively deal with safety-related organizational practices, environmental conditions, and human relations issues.
You'll examine your function and leadership role as a safety and health practitioner as special knowledge and skills are covered in this course, including:
Interviewing and consulting
Addressing individual and organizational dynamics
Conducting safety audits
Influencing and managing change
Working with a safety and health committee
Budgeting for safety and health efforts
As a special review activity, you'll assess your own organization's safety and health practices and create a management plan that you can take back to your facility for implementation.
We recommend that you successfully complete Principles of Occupational Health prior to enrolling in this program.
4-Day Course
Time:
8:30am - 4:00pm
Description:
Safety Management Techniques
Location: Myrtle Beach SC
Fee: Member $1,195 Non-member, $1,550
Advanced Safety Certificate
Safety Management Techniques
Let us help you and your company achieve excellence in your safety and health efforts. Attend this essential and practical course in safety management techniques.
WHICH CERTIFICATE?
Step 3: Advanced Safety Certificate
TRAINING GOAL
Upon completion of the Safety Management Techniques course, you'll be able to use new knowledge and skills to influence the safety and health efforts at your facility/company.
WHO SHOULD ATTEND?
Attend the Safety Management Techniques course if you are coordinating, supervising, or managing safety and health efforts at your facility/company. Designed for the safety leader, this course meets the needs of safety and health committee leaders, supervisors, and middle/upper managers.
WHY SHOULD YOU ATTEND?
Based on sound safety, management, quality, and performance technology principles, Safety Management Techniques is a 4.5 day (30 hours) course that will help you manage employees and/or projects in your safety and health efforts. Program content, case studies, exercises, and discussions focus on the practical knowledge and skills required to effectively deal with safety-related organizational practices, environmental conditions, and human relations issues.
You'll examine your function and leadership role as a safety and health practitioner as special knowledge and skills are covered in this course, including:
Interviewing and consulting
Addressing individual and organizational dynamics
Conducting safety audits
Influencing and managing change
Working with a safety and health committee
Budgeting for safety and health efforts
As a special review activity, you'll assess your own organization's safety and health practices and create a management plan that you can take back to your facility for implementation.
We recommend that you successfully complete Principles of Occupational Health prior to enrolling in this program.
4-Day Course
Time:
8:30am - 4:00pm
Description:
Safety Management Techniques
Location: Myrtle Beach SC
Fee: Member $1,195 Non-member, $1,550
Advanced Safety Certificate
Safety Management Techniques
Let us help you and your company achieve excellence in your safety and health efforts. Attend this essential and practical course in safety management techniques.
WHICH CERTIFICATE?
Step 3: Advanced Safety Certificate
TRAINING GOAL
Upon completion of the Safety Management Techniques course, you'll be able to use new knowledge and skills to influence the safety and health efforts at your facility/company.
WHO SHOULD ATTEND?
Attend the Safety Management Techniques course if you are coordinating, supervising, or managing safety and health efforts at your facility/company. Designed for the safety leader, this course meets the needs of safety and health committee leaders, supervisors, and middle/upper managers.
WHY SHOULD YOU ATTEND?
Based on sound safety, management, quality, and performance technology principles, Safety Management Techniques is a 4.5 day (30 hours) course that will help you manage employees and/or projects in your safety and health efforts. Program content, case studies, exercises, and discussions focus on the practical knowledge and skills required to effectively deal with safety-related organizational practices, environmental conditions, and human relations issues.
You'll examine your function and leadership role as a safety and health practitioner as special knowledge and skills are covered in this course, including:
Interviewing and consulting
Addressing individual and organizational dynamics
Conducting safety audits
Influencing and managing change
Working with a safety and health committee
Budgeting for safety and health efforts
As a special review activity, you'll assess your own organization's safety and health practices and create a management plan that you can take back to your facility for implementation.
We recommend that you successfully complete Principles of Occupational Health prior to enrolling in this program.
4-Day Course
Time:
8:30am - 4:00pm
Description:
Incident Investigation
Location: Myrtle Beach SC
Fee: Member $295 Non-member, $385
Training goal
To focus on techniques for gathering complete, accurate and objective accident data used to arrive at true root causes and determine corrective action. To further examine and analyze data as a means of preventing injuries, property damage and financial losses.
Who should attend?
All levels of management, safety practitioners, safety committee members, and individuals responsible for investigating accidents (incidents).
You'll learn to:
Employ effective investigation and interview techniques.
Analyze accidents to identify "true" root causes.
Describe human relations issues affecting accident reporting.
Participants examine:
Incidents to investigate.
On-site investigation process.
Data to include in investigation reports.
Witness interview techniques.
Post action: hazard control measures and follow-up.
See course descriptions for Job Safety Analysis, Team Safety and Safety Inspections courses. For your convenience, courses are offered during the same week.
Description:
Certified Industrial Hygienist (CIH) Review Course
Offered by Bowen EHS, Inc.
Location: Columbia, SC
Member Rate: $1049.00
Non Member Rate: $1299.00
Class is size limited to 16 Participants - Register Today!
Would you like to earn your CIH? This course is designed to prepare participants to successful take the CIH exam and earn their certification. See our Guarantee!
Prerequisites:
This course has no prerequisites, however, the American Board of Industrial Hygiene (ABIH) does have certain requirements for individuals that would like to become certified in safety. To determine your eligibility to sit for the exam, please visit their website:
http://www.abih.org/
The exam is tough. We help you prepare for the exam with a thorough review of the fundamental issues in each subject. When you are prepared to answer the fundamental questions quickly, you can devote more time to the advanced questions.
The course will be held at the National Safety Council office in Columbia, SC on June 8-11 2009 from 8 am -5 pm each day. The course contains 16 modules with homework problems designed to help you pass the exam. Our syllabus includes:
TUESDAY
Radiation
Ventilation
Biohazards
Air Sampling Instrumentation
WEDNESDAY
Air Sampling Instrumentation
Indoor Air Quality
Community Exposure
Ergonomics & PPE
THURSDAY
Noise
Health Risk Analysis
Training & Management
Final Exam
GUARANTEE
If you meet the conditions below and do not pass your exam, you may repeat the online course at no cost provided the course is offered and space is available. Conditions:
1.You must take the exam within 6 months of completing the online course.
2.You must mail a copy of your exam results notification to Bowen EHS, Inc. within 30 days of receiving the results.
Time:
8:30am - 5:00pm
Description:
Description:
Certified Industrial Hygienist (CIH) Review Course
Offered by Bowen EHS, Inc.
Location: Columbia, SC
Member Rate: $1049.00
Non Member Rate: $1299.00
Class is size limited to 16 Participants - Register Today!
Would you like to earn your CIH? This course is designed to prepare participants to successful take the CIH exam and earn their certification. See our Guarantee!
Prerequisites:
This course has no prerequisites, however, the American Board of Industrial Hygiene (ABIH) does have certain requirements for individuals that would like to become certified in safety. To determine your eligibility to sit for the exam, please visit their website:
http://www.abih.org/
The exam is tough. We help you prepare for the exam with a thorough review of the fundamental issues in each subject. When you are prepared to answer the fundamental questions quickly, you can devote more time to the advanced questions.
The course will be held at the National Safety Council office in Columbia, SC on June 8-11 2009 from 8 am -5 pm each day. The course contains 16 modules with homework problems designed to help you pass the exam. Our syllabus includes:
TUESDAY
Radiation
Ventilation
Biohazards
Air Sampling Instrumentation
WEDNESDAY
Air Sampling Instrumentation
Indoor Air Quality
Community Exposure
Ergonomics & PPE
THURSDAY
Noise
Health Risk Analysis
Training & Management
Final Exam
GUARANTEE
If you meet the conditions below and do not pass your exam, you may repeat the online course at no cost provided the course is offered and space is available. Conditions:
1.You must take the exam within 6 months of completing the online course.
2.You must mail a copy of your exam results notification to Bowen EHS, Inc. within 30 days of receiving the results.
Time:
9:00am - 5:00pm
Description:
8 Hour Defensive Driving Instructor Course
Location: Columbia SC
Fee: Member $355, Non-member $445
(The teaching kit is a required purchase and annual certification)
The National Safety Council first introduced defensive driving concepts in 1964. DDC-8 has come a long way since then, but the importance of sharing defensive driving principles with all drivers still has not changed. Our master trainers will provide you with the tools and knowledge to become an excellent trainer.
TRAINING GOAL
During this 3-day course, you'll gain the confidence and knowledge to be an effective trainer for our most popular defensive driving course.
WHO SHOULD ATTEND?
Safety managers, fleet supervisors, HR managers, and driving school instructors should all attend this course.
WHY SHOULD YOU ATTEND?
Driver error causes 62% of all motor vehicle crashes. Research shows that learning critical defensive driving techniques can significantly reduce accidents and save lives. DDC 8 is affordable, costing as little as $5 per driver. The modular format offers flexibility to your training schedule and makes it easy to use. This is the course that should be part of every experienced driver's education. Including it in your driver training program can significantly reduce the number of collisions and citations your drivers experience.
Topics covered in the instructor course include:
how to get students involved in the course
how to use course materials
administrative responsibilities
adult learning needs
developing effective teaching skills
accident preventability
driving conditions
following distance
head-on collisions
intersections
alcohol and drugs
and much more
Time:
8:30am - 5:00pm
Description:
Description:
Certified Industrial Hygienist (CIH) Review Course
Offered by Bowen EHS, Inc.
Location: Columbia, SC
Member Rate: $1049.00
Non Member Rate: $1299.00
Class is size limited to 16 Participants - Register Today!
Would you like to earn your CIH? This course is designed to prepare participants to successful take the CIH exam and earn their certification. See our Guarantee!
Prerequisites:
This course has no prerequisites, however, the American Board of Industrial Hygiene (ABIH) does have certain requirements for individuals that would like to become certified in safety. To determine your eligibility to sit for the exam, please visit their website:
http://www.abih.org/
The exam is tough. We help you prepare for the exam with a thorough review of the fundamental issues in each subject. When you are prepared to answer the fundamental questions quickly, you can devote more time to the advanced questions.
The course will be held at the National Safety Council office in Columbia, SC on June 8-11 2009 from 8 am -5 pm each day. The course contains 16 modules with homework problems designed to help you pass the exam. Our syllabus includes:
TUESDAY
Radiation
Ventilation
Biohazards
Air Sampling Instrumentation
WEDNESDAY
Air Sampling Instrumentation
Indoor Air Quality
Community Exposure
Ergonomics & PPE
THURSDAY
Noise
Health Risk Analysis
Training & Management
Final Exam
GUARANTEE
If you meet the conditions below and do not pass your exam, you may repeat the online course at no cost provided the course is offered and space is available. Conditions:
1.You must take the exam within 6 months of completing the online course.
2.You must mail a copy of your exam results notification to Bowen EHS, Inc. within 30 days of receiving the results.
Time:
9:00am - 5:00pm
Description:
8 Hour Defensive Driving Instructor Course
Location: Columbia SC
Fee: Member $355, Non-member $445
(The teaching kit is a required purchase and annual certification)
The National Safety Council first introduced defensive driving concepts in 1964. DDC-8 has come a long way since then, but the importance of sharing defensive driving principles with all drivers still has not changed. Our master trainers will provide you with the tools and knowledge to become an excellent trainer.
TRAINING GOAL
During this 3-day course, you'll gain the confidence and knowledge to be an effective trainer for our most popular defensive driving course.
WHO SHOULD ATTEND?
Safety managers, fleet supervisors, HR managers, and driving school instructors should all attend this course.
WHY SHOULD YOU ATTEND?
Driver error causes 62% of all motor vehicle crashes. Research shows that learning critical defensive driving techniques can significantly reduce accidents and save lives. DDC 8 is affordable, costing as little as $5 per driver. The modular format offers flexibility to your training schedule and makes it easy to use. This is the course that should be part of every experienced driver's education. Including it in your driver training program can significantly reduce the number of collisions and citations your drivers experience.
Topics covered in the instructor course include:
how to get students involved in the course
how to use course materials
administrative responsibilities
adult learning needs
developing effective teaching skills
accident preventability
driving conditions
following distance
head-on collisions
intersections
alcohol and drugs
and much more
Time:
8:30am - 5:00pm
Description:
Description:
Certified Industrial Hygienist (CIH) Review Course
Offered by Bowen EHS, Inc.
Location: Columbia, SC
Member Rate: $1049.00
Non Member Rate: $1299.00
Class is size limited to 16 Participants - Register Today!
Would you like to earn your CIH? This course is designed to prepare participants to successful take the CIH exam and earn their certification. See our Guarantee!
Prerequisites:
This course has no prerequisites, however, the American Board of Industrial Hygiene (ABIH) does have certain requirements for individuals that would like to become certified in safety. To determine your eligibility to sit for the exam, please visit their website:
http://www.abih.org/
The exam is tough. We help you prepare for the exam with a thorough review of the fundamental issues in each subject. When you are prepared to answer the fundamental questions quickly, you can devote more time to the advanced questions.
The course will be held at the National Safety Council office in Columbia, SC on June 8-11 2009 from 8 am -5 pm each day. The course contains 16 modules with homework problems designed to help you pass the exam. Our syllabus includes:
TUESDAY
Radiation
Ventilation
Biohazards
Air Sampling Instrumentation
WEDNESDAY
Air Sampling Instrumentation
Indoor Air Quality
Community Exposure
Ergonomics & PPE
THURSDAY
Noise
Health Risk Analysis
Training & Management
Final Exam
GUARANTEE
If you meet the conditions below and do not pass your exam, you may repeat the online course at no cost provided the course is offered and space is available. Conditions:
1.You must take the exam within 6 months of completing the online course.
2.You must mail a copy of your exam results notification to Bowen EHS, Inc. within 30 days of receiving the results.
Time:
9:00am - 5:00pm
Description:
8 Hour Defensive Driving Instructor Course
Location: Columbia SC
Fee: Member $355, Non-member $445
(The teaching kit is a required purchase and annual certification)
The National Safety Council first introduced defensive driving concepts in 1964. DDC-8 has come a long way since then, but the importance of sharing defensive driving principles with all drivers still has not changed. Our master trainers will provide you with the tools and knowledge to become an excellent trainer.
TRAINING GOAL
During this 3-day course, you'll gain the confidence and knowledge to be an effective trainer for our most popular defensive driving course.
WHO SHOULD ATTEND?
Safety managers, fleet supervisors, HR managers, and driving school instructors should all attend this course.
WHY SHOULD YOU ATTEND?
Driver error causes 62% of all motor vehicle crashes. Research shows that learning critical defensive driving techniques can significantly reduce accidents and save lives. DDC 8 is affordable, costing as little as $5 per driver. The modular format offers flexibility to your training schedule and makes it easy to use. This is the course that should be part of every experienced driver's education. Including it in your driver training program can significantly reduce the number of collisions and citations your drivers experience.
8:30am» Confined Spaces